SEMI SMOOTH PLUS – ROUGH SURFACES PAINT ROLLERS
This is the longest nap in our mini-roller microfibre range. The surface you’ll be painting determines the nap you will need - the rougher the surface the higher the NAP/Pile. We designed our mini microfibre 15mm NAP/Pile for reaching into the nook and crannies spots when you're painting. They are great for textured plaster, concrete blocks, bricks, and fences or embossed wallpaper. Our 15mm Minis are ready for your toughest painting challenges!
Perfect for water-based paints
The key to achieving a satisfying finish is to make sure that the painted surface is prepared well - holes filled, surface well cleaned, and dried. Also, before starting using our rollers, always use water to "rinse & spin before you begin" and you will achieve the best finish right from the start. Besides, the post-painting cleaning process will be much easier too!
- Perfect for water-based paints. Recommended for primers and topcoats.
- Ideal for weatherboards, textured plaster and surfaces, bricks, fences, and gates.
- Excellent paint pick-up and release, superior finish, no need to lay off, excellent coverage.
- NAP/Pile: 15mm | 5/8″
- Sizes: 100mm | 4″
- Packs: 3-Packs
What roller length should you use?
For smaller walls and ceilings, choose a 230mm/9-inch roller, slightly larger surfaces we would recommend 270mm/11-inch and 360mm/14-inch would be used mainly on commercial projects or large surfaces.
» Keep in mind that larger rollers are heavier and more challenging to use.
What roller NAP/Pile should you use?
Our Microfibre 5mm NAP/Pile rollers are generally used for smooth surfaces, flat walls, doors, and large cupboards where the smoothest finish is desired.
It is the best choice for a topcoat or any large paint projects where coverage and smooth finish is required. The roller sleeve fabric is designed to leave a smooth and uniform finish on painted surfaces.
We recommend our Dacron for acrylic primers to enhance the finish of the microfibre.
When you do not require a smooth finish and time is the essence our 15mm microfibre roller is the perfect fit. It holds more paint than 10mm and still leaves a semi-smooth finish. The amount of paint it holds will help you complete your project faster.
Because of the structure of the fabric, our 10mm Dacron rollers perform best with acrylic paints and are not suitable for oil-based paints.
If you’re priming your brand new plasterboard walls or you're repainting from light paint colour to a dark colour or from dark to lighter, our Dacron is the best pick for you to achieve optimal coverage and a professional-looking finish.
Learn about Dacron vs Microfibre Paint Rollers
Not sure which roller to choose for your job or project? ASK US NOW